Products

The Bycan PS-28100 is the latest to join the family of power supplies and battery chargers for commercial aircraft servicing. This equipment will provide the amps needed for gear retraction tests as well as the filtered power for all types of avionics service. The PS-28100 will furnish up to 100 amps at 28 VDC. It plugs into the APU connector on the engine cowling and automatically disconnects the battery so that it will not be drained by the servicing processes. A valuable ramp accessory.

FEATURES

• 100 amperes filtered 28 volt supply
• Aircraft APU connectors furnished
• Operates from 230 VAC, 60 Hz
• 8 foot DC cable furnished
• Ferro-resonant regulated supply
• DC current limited
• Front panel meter, controls
• Portable, weighs only 64 lb.
• One year warranty
• Extensive testing by FBO's

The Bycan PS-28100 is the latest to join the family of power supplies and battery chargers for commercial aircraft servicing. This equipment will provide the amps needed for gear retraction tests as well as the filtered power for all types of avionics service. The PS-28100 will furnish up to 100 amps at 28 VDC. It plugs into the APU connector on the engine cowling and automatically disconnects the battery so that it will not be drained by the servicing processes. A valuable ramp accessory.

FEATURES

100 amperes filtered 28 volt supply

Aircraft APU connectors furnished

Operates from 230 VAC, 60 Hz

8 foot DC cable furnished

Ferro-resonant regulated supply

DC current limited

Front panel meter, controls

Portable, weighs only 64 lb.

One year warranty

Extensive testing by FBO's

"

The Bycan RB-14/28-25 Red Baron APU is designed to operate avionics equipment in private and commercial aircraft. The Red Baron will output 14 or 28 volts DC at up to 25 amperes. The voltage is filtered to eliminate hum and is regulated against input AC line voltage changes. The output DC voltage and current are displayed on front panel meters. The DC is also protected by a circuit breaker. Selection of output voltage is by a front panel switch which is protected by a switch guard. Closing the guard forces the switch to the 14 volt position. The RB-14/28-25 plugs directly into the APU receptacle on the aircraft. It comes equipped with either the standard three-prong connector or the Piper coaxial connector. Both connectors can be supplied, optionally at a slight extra cost. DC cable length is 8'. The AC line cord is normally 8' in length, but special lengths up to 50' are available. The housing is steel, powder coated in red, for optimum flight line safety. Rubber feet and handle are included.

 Product Features

• Angled diagonal end cutter at 29°
• Flush cutting
• For cutting directly above the work area
• To use on closely spaced adjacent components
• Features green cushion grips

"

8-32 (Thread Size) Instrument installation tool.

Holds Mooring Ring squarely against the back of the instrument panel so that Altimeters, VSIs, Air-speeds, HSIs, ADIs, and RMIs slide in straight and smooth. Use with front/rear panel installed instruments that employ a rear Mooring Ring. Pays for itself the very first time it's used.

• No more instrument screws with crossed threads.
• No need to remove adjacent instruments.
• No more fighting a simple instrument reinstall.
• No more damage to Instrument Lighting Trays.
• Knurled ends for super gripping power when fingers are slippery.
• Long enough to completely control the Mooring Ring.
• Short enough not to interfere with Control Column or Yoke.
• Precision machined from high grade Stainless Steel.

With 1/4" and 3/8" quick-release ratcheting
drives, 32 SAE and metric sockets, 12 SAE
and metric combination wrenches, plus 24
other tools, this is one of the most versatile
tool selections ever assembled. All tools are
industrial-quality, meeting stringent new ANSI
and ASME specifications, and come with a
full satisfaction guarantee.

6-32 (Thread Size) Instrument installation tool.

Holds Mooring Ring squarely against the back of the instrument panel so that Altimeters, VSIs, Air-speeds, HSIs, ADIs, and RMIs slide in straight and smooth. Use with front/rear panel installed instruments that employ a rear Mooring Ring. Pays for itself the very first time it's used.

• No more instrument screws with crossed threads.
• No need to remove adjacent instruments.
• No more fighting a simple instrument reinstall.
• No more damage to Instrument Lighting Trays.
• Knurled ends for super gripping power when fingers are slippery.
• Long enough to completely control the Mooring Ring.
• Short enough not to interfere with Control Column or Yoke.
• Precision machined from high grade Stainless Steel.

5" 60° Curved Long Nose Pliers with Green Cushion Grips and Smooth Jaws.

• 25W - Diamond Grip jaw design
• Cushion throat holds clipped wire - no FOD
• Reversible action for Left and Right twists
• Auto Spring return