Products

"

 Product Features

• Angled diagonal end cutter at 29°
• Flush cutting
• For cutting directly above the work area
• To use on closely spaced adjacent components
• Features green cushion grips

The Bycan RB-14/28-25 Red Baron APU is designed to operate avionics equipment in private and commercial aircraft. The Red Baron will output 14 or 28 volts DC at up to 25 amperes. The voltage is filtered to eliminate hum and is regulated against input AC line voltage changes. The output DC voltage and current are displayed on front panel meters. The DC is also protected by a circuit breaker. Selection of output voltage is by a front panel switch which is protected by a switch guard. Closing the guard forces the switch to the 14 volt position. The RB-14/28-25 plugs directly into the APU receptacle on the aircraft. It comes equipped with either the standard three-prong connector or the Piper coaxial connector. Both connectors can be supplied, optionally at a slight extra cost. DC cable length is 8'. The AC line cord is normally 8' in length, but special lengths up to 50' are available. The housing is steel, powder coated in red, for optimum flight line safety. Rubber feet and handle are included.

The Bycan PS-28100 is the latest to join the family of power supplies and battery chargers for commercial aircraft servicing. This equipment will provide the amps needed for gear retraction tests as well as the filtered power for all types of avionics service. The PS-28100 will furnish up to 100 amps at 28 VDC. It plugs into the APU connector on the engine cowling and automatically disconnects the battery so that it will not be drained by the servicing processes. A valuable ramp accessory.

FEATURES

100 amperes filtered 28 volt supply

Aircraft APU connectors furnished

Operates from 230 VAC, 60 Hz

8 foot DC cable furnished

Ferro-resonant regulated supply

DC current limited

Front panel meter, controls

Portable, weighs only 64 lb.

One year warranty

Extensive testing by FBO's

"

The Bycan PS-28100 is the latest to join the family of power supplies and battery chargers for commercial aircraft servicing. This equipment will provide the amps needed for gear retraction tests as well as the filtered power for all types of avionics service. The PS-28100 will furnish up to 100 amps at 28 VDC. It plugs into the APU connector on the engine cowling and automatically disconnects the battery so that it will not be drained by the servicing processes. A valuable ramp accessory.

FEATURES

• 100 amperes filtered 28 volt supply
• Aircraft APU connectors furnished
• Operates from 230 VAC, 60 Hz
• 8 foot DC cable furnished
• Ferro-resonant regulated supply
• DC current limited
• Front panel meter, controls
• Portable, weighs only 64 lb.
• One year warranty
• Extensive testing by FBO's

The MG-1400 Cable Tie Cutter/Wire Stripper easily strips 12 - 22 gauge wire and cuts plastic or thin copper and aluminum cable ties with a pointed nose crafted with durable heat-treated alloy steel. This tool is perfect for applications like repairing and retrofitting wire harnesses and hose assemblies. The ergonomic, cushioned handle is very comfortable and accommodates the natural movements of the user's hand with an assisted auto return spring.

• Safely removes cable ties and straps with safety guards that slide behind the cable tie strap to prevent the sharp blades from contacting bundled items
• The pointed nose is constructed with durable heat-treated alloy steel with a hardness range of 53 - 58Rc that easily cuts plastic, thin copper, and aluminum and is also designed to strip 12 - 22 gauge wire
• The ergonomic, cushioned grip handles are designed to fit the user's hand and maximize natural hand contraction with an assisted auto return spring
• Perfect for use with repairing and retrofitting wire harness and hose assemblies or removing packaged items

Cannon #8 coax removal tool.

AMP Certi-Lok crimping tool that uses interchangeable die sets (sold separately). This is a basic tool that uses interchangeable snap-in die sets, which can be easily inserted or removed. Die set (P/N: 169404) crimps AMP red / blue / yellow insulated terminals and splices (22-10 AWG).

CESSNA PLUG FOR PS-28100

3-step coaxial stripper.

• Adjustable coaxial wire stripper
• For popular dual crimp BNC and TNC connectors
• Strips braid 0.240 inch (6mm) and dielectric 0.240 inch (6mm)
• Replacement cassettes available